Author |
Message |
|
Recursive Acronym
Advanced Member
Joined: 11 Dec 2006 Posts: 499
|
Posted: 05 Jan 2007 07:56:40 pm Post subject: |
|
|
I have 2 VGA monitors, and each are missing pins from their 15 pin connections. The first has 4 missing pins and doesn't work at all. The second is missing one pin but still works. I only just noticed this missing pin, but it may have been missing for a while. The only problem that I have ever noticed when using the monitor is that sometimes programs like TILP will change the colors of various onscreen things (I use it with Windows 98 SE). Here is a schematic of where the missing pin should be:
a0 0 0 0 0
0 0 0 X 0
a0 0 0 0 0
I don't know how this happened, but I may have been yanking out the VGA plugs on both monitors altogether too carelessly. How can I fix the monitors? Both are really old CRT's and not worth spending very much money on. |
|
Back to top |
|
|
kermmartian Site Admin Kemetech
Calc Guru
Joined: 20 Mar 2004 Posts: 1220
|
Posted: 05 Jan 2007 08:03:02 pm Post subject: |
|
|
Pin 9 is a non-connected pin, according to the DB15 pinout. You're in luck |
|
Back to top |
|
|
Recursive Acronym
Advanced Member
Joined: 11 Dec 2006 Posts: 499
|
Posted: 05 Jan 2007 08:04:34 pm Post subject: |
|
|
kermmartian wrote: Pin 9 is a non-connected pin, according to the DB15 pinout. You're in luck
[post="94387"]<{POST_SNAPBACK}>[/post]
Yay... but what about the other monitor? |
|
Back to top |
|
|
kermmartian Site Admin Kemetech
Calc Guru
Joined: 20 Mar 2004 Posts: 1220
|
Posted: 05 Jan 2007 08:06:02 pm Post subject: |
|
|
Recursive Acronym wrote: kermmartian wrote: Pin 9 is a non-connected pin, according to the DB15 pinout. You're in luck
[post="94387"]<{POST_SNAPBACK}>[/post]
Yay... but what about the other monitor?
[post="94389"]<{POST_SNAPBACK}>[/post]
Do another diagram to show which 4 are missing from the other |
|
Back to top |
|
|
Recursive Acronym
Advanced Member
Joined: 11 Dec 2006 Posts: 499
|
Posted: 05 Jan 2007 08:19:44 pm Post subject: |
|
|
I'll have to do it later and get back to you. |
|
Back to top |
|
|
NETWizz Byte by bit
Bandwidth Hog
Joined: 20 May 2003 Posts: 2369
|
Posted: 05 Jan 2007 10:11:18 pm Post subject: |
|
|
It is no big deal. It was built that way by design. I see this hundreds of times and know it to be by design.
Here is a picture:
Here is another:
And another:
Okay and another one:
All of these pictures were taken by people independent of each other. I found them on Google Images. If you are missing the same pin all of these cables are missing, which I am sure you are, then you are fine. |
|
Back to top |
|
|
Arcane Wizard `semi-hippie`
Super Elite (Last Title)
Joined: 02 Jun 2003 Posts: 8993
|
Posted: 06 Jan 2007 09:10:22 am Post subject: |
|
|
Recursive Acronym wrote: kermmartian wrote: Pin 9 is a non-connected pin, according to the DB15 pinout. You're in luck
[post="94387"]<{POST_SNAPBACK}>[/post]
Yay... but what about the other monitor?
[post="94389"]<{POST_SNAPBACK}>[/post]
5,9, and 15 shouldn't be needed. See: http://www.acl.co.uk/pinouts.htm
If any other pin is missing you can try to fix it through the appliance of a metal pin, a soldering iron, and an ohm meter. |
|
Back to top |
|
|
Recursive Acronym
Advanced Member
Joined: 11 Dec 2006 Posts: 499
|
Posted: 11 Jan 2007 06:14:58 pm Post subject: |
|
|
Arcane Wizard wrote: Recursive Acronym wrote: kermmartian wrote: Pin 9 is a non-connected pin, according to the DB15 pinout. You're in luck
[post="94387"]<{POST_SNAPBACK}>[/post]
Yay... but what about the other monitor?
[post="94389"]<{POST_SNAPBACK}>[/post]
5,9, and 15 shouldn't be needed. See: http://www.acl.co.uk/pinouts.htm
If any other pin is missing you can try to fix it through the appliance of a metal pin, a soldering iron, and an ohm meter.
[post="94427"]<{POST_SNAPBACK}>[/post]
5, 9, 12, and 15 are missing. So, I need to replace 12. Can you elaborate on the repair process? The first thing I tried was sticking parts of paper clips in the holes... such a n00b... |
|
Back to top |
|
|
DigiTan Unregistered HyperCam 2
Super Elite (Last Title)
Joined: 10 Nov 2003 Posts: 4468
|
Posted: 11 Jan 2007 07:00:21 pm Post subject: |
|
|
I guess if you had to, you could disassemble the plug and insert male D-sub pins where any are missing. Radio shack has em. As NetWiz said though, I also have VGA cables with pins missing. And it still works on any computer I apply it to. |
|
Back to top |
|
|
alexrudd pm me if you read this
Bandwidth Hog
Joined: 06 Oct 2004 Posts: 2335
|
Posted: 11 Jan 2007 08:17:32 pm Post subject: |
|
|
I have a monitor that I was using until a month ago that has the same pins missing. I don't think adding pin #12 will do anything. |
|
Back to top |
|
|
NETWizz Byte by bit
Bandwidth Hog
Joined: 20 May 2003 Posts: 2369
|
Posted: 11 Jan 2007 08:19:25 pm Post subject: |
|
|
I would try it. Quite honestly, chances are good they will just work. If not, no harm should happen to your computer. Should being the key word in this sentence. I would, however, try this on a computer you do not care about too much.
You can also look up how to crimp VGA cables on Google. There is a process, but I have never done it, so I am not qualified to go into detail.
If you have a DVI cable, that is a whole different story. Good Luck |
|
Back to top |
|
|
leofox INF student
Super Elite (Last Title)
Joined: 11 Apr 2004 Posts: 3562
|
Posted: 12 Jan 2007 12:30:02 pm Post subject: |
|
|
My connector misses 5 pins and works fine (different type tho). The pins are usually just bended, not missing. Try what else can be wrong with the cam. |
|
Back to top |
|
|
|