Included in the kit is a 25' spool of 22AWG black hook-up wire and a pair of wire strippers. To hook up electronic components on a solderless breadboard, you need to have various lengths of breadboarding/"jumper" wires to connect them with. To start, cut 10 3" pieces and 10 6" pieces of wire from your spool. Next, use your wire strippers as shown in the video to strip off 1/4" of insulation from each end of each piece of wire:
Congradulations! Now you have a set of jumper wires to use with your solderless breadboard. If you need more jumper wires, just follow this guide again to create whatever quantity of jumper wires you need.
Congradulations! Now you have a set of jumper wires to use with your solderless breadboard. If you need more jumper wires, just follow this guide again to create whatever quantity of jumper wires you need.