Hell once again, Cemetech.
I am making a quadcopter as per title, and I have already made up a list of components I will be order.
I was hoping to get your feedback as to any reason why any of these might be a bad pick.
Total weight of my copter (excluding props, including everything else, 1116.6g)
I was hoping you guys could point me towards the best propellers to use to get the correct amount of thrust for easy lift off and maneuverability. I've read that twice the weight in thrust is a really good ratio, but 2kG of thrust seems like a lot. I would also like to know if you guys recommend any good lightweight cameras to mount to the copter as well. Thank you all for taking the time to read and respond, I will update my progress throughout the build!
Motors - SunnySky X2212-13
http://www.quadrysteria.com/store/p1/SunnySky_X2212-13_980kv_II_Motor.html
Frame - Hobbyking SK450 Glass Fiber Quadcopter Frame 450mm
http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=24291&aff=224284
On board flight controller - OpenPilot CC3D Flight Controller
http://www.getfpv.com/flight-controllers/openpilot-cc3d-flight-controller.html
ESC - Hobby King 20A ESC 3A UBEC
http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=15202&aff=224284
Battery - Turnigy 3300mAh 3S 30C Lipo
http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=15003&aff=224284
I am making a quadcopter as per title, and I have already made up a list of components I will be order.
I was hoping to get your feedback as to any reason why any of these might be a bad pick.
Total weight of my copter (excluding props, including everything else, 1116.6g)
I was hoping you guys could point me towards the best propellers to use to get the correct amount of thrust for easy lift off and maneuverability. I've read that twice the weight in thrust is a really good ratio, but 2kG of thrust seems like a lot. I would also like to know if you guys recommend any good lightweight cameras to mount to the copter as well. Thank you all for taking the time to read and respond, I will update my progress throughout the build!
Motors - SunnySky X2212-13
http://www.quadrysteria.com/store/p1/SunnySky_X2212-13_980kv_II_Motor.html
Frame - Hobbyking SK450 Glass Fiber Quadcopter Frame 450mm
http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=24291&aff=224284
On board flight controller - OpenPilot CC3D Flight Controller
http://www.getfpv.com/flight-controllers/openpilot-cc3d-flight-controller.html
ESC - Hobby King 20A ESC 3A UBEC
http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=15202&aff=224284
Battery - Turnigy 3300mAh 3S 30C Lipo
http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=15003&aff=224284