This is an archived, read-only copy of the United-TI subforum , including posts and topic from May 2003 to April 2012. If you would like to discuss any of the topics in this forum, you can visit Cemetech's Technology & Calculator Open Topic subforum. Some of these topics may also be directly-linked to active Cemetech topics. If you are a Cemetech member with a linked United-TI account, you can link United-TI topics here with your current Cemetech topics.

This forum is locked: you cannot post, reply to, or edit topics. Calculator Tech Support => Technology & Calculator Open Topic
Author Message
johnmeyer


Newbie


Joined: 03 Dec 2010
Posts: 2

Posted: 03 Dec 2010 11:11:51 am    Post subject:

Hello

I have a TI Nspire (non CAS) Clickpad, with 1.7 OS. My PC is on Windows XP. The problem is I cannot connect it to my computer. The problem must be in this TI-Nspire, because i've tried my computer on another TI-Nspire and it worked perfectly. I also tried the nspire on another computer (macbookpro) and ti nspire computer link, as on XP, and the MAC simply didn't recognize the nspire.

I used the HOME+ENTER+P+On and formated the calculador, hoping that the Usb link would start working, but it didn't, so now the calculador is stuck on "Install a new OS" and i cannot install it, because no computer would recognize the calculator, not even another nspire.

I have tried linking the calculador with TI Nspire computer Link, NDless and TILP, none of them worked (the calculador isn´t recognized).

Can anyone help?

Thank you...
Back to top
Lionel Debroux


Member


Joined: 01 Aug 2009
Posts: 170

Posted: 05 Dec 2010 07:13:26 am    Post subject:

TILP and TINCLS cannot both work at the same time on a given computer, they each need to use their own set of drivers Smile
For one to work, you need to uninstall the other's set of drivers.

Now, about your calculator: if your computer recognizes another Nspire perfectly, but two different computers don't recognize this Nspire at all, then it's rather likely that there's something wrong with the calculator itself...
Back to top
johnmeyer


Newbie


Joined: 03 Dec 2010
Posts: 2

Posted: 06 Dec 2010 05:58:00 am    Post subject:

I agree, but the problem with the calculator: it is software related? Or is it hardware?
Back to top
Lionel Debroux


Member


Joined: 01 Aug 2009
Posts: 170

Posted: 12 Dec 2010 11:48:00 am    Post subject:

Well, I'd say "hardware", because computers and other Nspires can handle a Nspire waiting for an OS, whether it's in boot2 or not...
Back to top
simondemeyere


Newbie


Joined: 31 Mar 2011
Posts: 1

Posted: 31 Mar 2011 03:40:20 pm    Post subject:

Had the same problem. Run connection software as administrator (right click)
Back to top
Lionel Debroux


Member


Joined: 01 Aug 2009
Posts: 170

Posted: 20 Apr 2011 01:44:14 am    Post subject:

Running connection software as administrator is not going to fix the problem reported by the OP, so it's not the same problem Wink
Back to top
Atham


Newbie


Joined: 28 Dec 2011
Posts: 17

Posted: 28 Dec 2011 01:00:10 pm    Post subject:

I have the same problem, although I have a TI Nspire CX and the PC doesn't detect it. I have Windows 7 64 bit. Can it be the OS?
Back to top
Xeda112358


Active Member


Joined: 19 May 2009
Posts: 520

Posted: 29 Dec 2011 12:45:32 am    Post subject:

That could very well be it, thought I don't know much about the nSpire. I should be getting one sometime, though, from the zContest.
Back to top
Display posts from previous:   
Register to Join the Conversation
Have your own thoughts to add to this or any other topic? Want to ask a question, offer a suggestion, share your own programs and projects, upload a file to the file archives, get help with calculator and computer programming, or simply chat with like-minded coders and tech and calculator enthusiasts via the site-wide AJAX SAX widget? Registration for a free Cemetech account only takes a minute.

» Go to Registration page
    »
» View previous topic :: View next topic  
Page 1 of 1 » All times are GMT - 5 Hours

 

Advertisement