Login [Register]
Don't have an account? Register now to chat, post, use our tools, and much more.
This is an archived, read-only copy of the United-TI subforum , including posts and topic from May 2003 to April 2012. If you would like to discuss any of the topics in this forum, you can visit Cemetech's Technology & Calculator Open Topic subforum. Some of these topics may also be directly-linked to active Cemetech topics. If you are a Cemetech member with a linked United-TI account, you can link United-TI topics here with your current Cemetech topics.

This forum is locked: you cannot post, reply to, or edit topics. Community News & Discuss Nspire => Technology & Calculator Open Topic
Author Message


Joined: 22 Jan 2007
Posts: 770

Posted: 23 Aug 2010 01:38:40 pm    Post subject:

Yeah, "p <addr>" can be very useful (it's a port monitor, basically). You can output a value by pressing enter (and pressing enter again before typing 8 hex characters will cancel).

When hex editing, you can press the newline button instead of the enter button to enter ASCII instead of hex. Just type the letters you need.

Also, pressing any arrow key will paste the previous thing entered (or at least what you haven't overwritten). Like, you can type "r 10000000" to read address 10000000, then type an "h" and press an arrow key and the line will then be "h 10000000".

And thanks to Goplat for the ARM disassembly code (used with his permission of course, with slight modifications to the string output methods). Smile
Back to top


Joined: 28 Jun 2010
Posts: 22

Posted: 25 Nov 2010 09:55:46 pm    Post subject:

bsl wrote:

Here it is , but you wont be able to do much with it for now ( Jailed in the root directory).

Use calc84's console program [ which runs on both calcs ] to get to the root directory.
Do it on the emulator only. If you do it on the calculator you will have to reinstall the OS. Sad


Run the console program and enter:
w 1057a950 2f
Run the console program and enter:
w 1054E950 2f

Do we have the address to do this on OS 1.7 Non CAS? Thanks!
Back to top

Advanced Newbie

Joined: 09 Jan 2010
Posts: 94

Posted: 25 Nov 2010 10:34:03 pm    Post subject:

apcalc wrote:

Do we have the address to do this on OS 1.7 Non CAS? Thanks!

Yes, you can find these and test them without Ndless even installed on the emulator.
On hardware however, you don't have access to the RAM without Ndless.


0x1077c8cc  noncas1.7
0x107408cc  cas1.7

Got Ndless 1.4 running under the latest updates. Very Happy
Back to top

Advanced Newbie

Joined: 09 Jan 2010
Posts: 94

Posted: 22 Dec 2010 03:36:57 pm    Post subject:

Here are the addresses for OS Folder Application


0x107d48cc  NCAS2.0.1.60
0x1079c8cc  CAS

What's nice about this, is you get to browse the entire directory tree, but you only see *.tns files.
On <OS2 you were stuck in the directory you specified.

Last edited by Guest on 23 Dec 2010 01:43:08 am; edited 1 time in total
Back to top


Joined: 05 Aug 2011
Posts: 3

Posted: 05 Aug 2011 09:52:43 pm    Post subject:

As I exited the Datalight carapace aback to the Folders appliance I breach on the set_accepted_aisle()
alarm as the appliance refreshes its ambiance - It tries to set its aisle to /abstracts/ , but I
amid a absent appearance afterwards the "/" so that it sets its aisle on the basis agenda instead
Back to top
Display posts from previous:   
Register to Join the Conversation
Have your own thoughts to add to this or any other topic? Want to ask a question, offer a suggestion, share your own programs and projects, upload a file to the file archives, get help with calculator and computer programming, or simply chat with like-minded coders and tech and calculator enthusiasts via the site-wide AJAX SAX widget? Registration for a free Cemetech account only takes a minute.

» Go to Registration page
    » Goto page Previous  1, 2
» View previous topic :: View next topic  
Page 2 of 2 » All times are GMT - 5 Hours