|Category:||EE & Hardware (back to list)|
|Project Page:||TI-82 Plus project page|
|Summary:||The TI-82 Plus is an amalgamation of a TI-82 and a TI-83 Plus. It combines the mainboard from the more powerful calculator with the case and LCD of the older calculator. Part of the PCB had to be redesigned to fit into the TI-82's smaller case.|
|Begin:||October 29, 2012|
|Completed:||October 27, 2013|
In October 2012, I started a project to build a TI-82 Plus: a mashup of a TI-82 and TI-83 Plus. I had recently acquired a large number of TI-82 calculators for a good price, and with many of them displaying the classic missing row/column problems that plague TI-82 and TI-86 calculators, I was looking for interesting hacking projects. I decided to keep all the outward appearances of the TI-82: the characteristic blue-scale LCD screen, the keyboard, the case, and the battery compartment. At the same time, I wanted the calculator inside to be a true TI-83 Plus. To make it extra-special, I decided to use the mainboard from one of the 1999 TI-83 Plus calculators in my collection, sporting the rare discrete z80 CPU. I set out to combine the mainboard from the TI-83 Plus with the LCD, keys, keyboard membrane, and case of the TI-82.
The project turned out to be not so simple. I painstakingly soldered the foreign LCD and mainboard together, and soldered TI-82 battery contacts onto the TI-83 Plus mainboard, but I soon hit a snag. Although consistency in TI's designs meant that the holes in the TI-83 Plus mainboard even matched the screw sockets in the TI-82's case, the mainboard was about half an inch too long for the case. Of course, something had to be done, and that something was dremelling off the bottom half-inch of the mainboard. The calculator now functioned (after having to replace the LCD a few more times after the calculator sitting dormant for nearly a year), but it had no link port. That bottom half-inch of the PCB contained the link port and four passive components necessary to protect the link port and the calculator components beyond. To solve this, I hacked together a small dead bug-style PCB fragment containing the two capacitors and two inductors, superglued it to the mainboard, drilled two tiny holes into the PCB to seat the now re-placed link port, and wired the whole thing up. Voila, I was able to send Doors CS 7 and a variety of programs and games.
Although I don't anticipate any direct future work on this project, in retrospect a TI-83 Plus Silver Edition mainboard would have been a good substitute. The TI-83 Plus Silver Edition can run Emu8x, which would have allowed me to emulate a TI-82 calculator on my TI-82 Plus.