MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM
MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM
MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM7    7MMMMMMMMMMMMM7   +7MMMMMMMMMMMMMMMMMM7  MMMM
MMMMMMMMMMMM,   MMMMMMMMMMMMMMMZ                  MMMMMMMMMMMMMMM=    7MMM7     MMMMMM    NMMI    MMMMMMMMMMMM     7MMMM
MMMMMMMMMMM      ?MMMMMMMMMMMMMMMMM=   MMMMMMMMM    +MMMMMMMMMM   NMMMMMMMMMM,  MMMMN  7MMMMMMM,  MMMMMMMMMZ   MMMMMMMMM
MMMMMMMMM=         MMMMMMMMMMMMMMMM=   MMMMMMMMMMM    MMMMMMM    MMMMMMMMMMMMO  MMM8  IMMMMMMMMZ  MMMMMMMM   8MMMMMMMMMM
MMMMMMMN     MM?    ?MMMMMMMMMMMMMM=   MMMMMMMMMMMM    MMMMM   $MMMMMMMMMMMMMM  MMM   7MMMMMMMMM  MMMMMMD   MMMMMMMMMMMM
MMMMMM     MMMMMM     MMMMMMMMMMMMM=   MMMMMMMMMMMMM    MMM$   MMMMMMMMMMMMMMMMMMMM    NMMMMMMMMMMMMMMM+   MMMMMMMMMMMMM
MMMMN     MMMMMMMM?    +MMMMMMMMMMM=   MMMMMMMMMMMMM7   MMM   ZMMMMMMMMMMMMMMMMMMMMO    ~MMMMMMMMMMMMMM   MMMMMMMMMMMMMM
MMM     MMMMMMMMMMMM     MMMMMMMMMM=   MMMMMMMMMMMMMM   ZM+   MMMMMMMMMMMMMMMMMMMMMMM      7MMMMMMMMMM    7       =MMMMM
MO    7MMMMM   OMMMMM?    $MMMMMMMM=   MMMMMMMMMMMMMM   ?M    MMMMMMMMMMMMMMMMMMMMMMMM:        MMMMMM+    +7MM7     DMMM
M?   MMMMMM     ?MMMMMM   OMMMMMMMM=   MMMMMMMMMMMMMM   ?M    MMMMMMMMMMMMMMMMMMMMMMMMMMM?       DMMM    MMMMMMMM    :MM
MMMMMMMMM=        MMMMMMMMMMMMMMMMM=   MMMMMMMMMMMMMM   OM=   ZMMMMMMMMMMMMMMMMMMMMMMMMMMMMM$     $MM    MMMMMMMMM    MM
MMMMMMMN     MM    .MMMMMMMMMMMMMMM=   MMMMMMMMMMMMMM   MMM    MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMD    MM    MMMMMMMMM7   MM
MMMMMM     MMMMM     MMMMMMMMMMMMMM=   MMMMMMMMMMMMM$   MMM7   MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMZ   7M    MMMMMMMMMD   MM
MMMMN     MMMMMMMM    .MMMMMMMMMMMM=   MMMMMMMMMMMMM   MMMMM    NMMMMMMMMMMMMM  MMM: 7MMMMMMMMMM   8M,   NMMMMMMMMO   MM
MMM     MMMMMMMMMMM?    +MMMMMMMMMM=   MMMMMMMMMMMM   NMMMMMM    DMMMMMMMMMMM8  MMM:  MMMMMMMMMN  ,MMM    MMMMMMMM    MM
M+    7MMMMMMMMMMMMMM    .MMMMMMMMM=   MMMMMMMMMN   +MMMMMMMMMN    MMMMMMMMMM:  MMM:  MMMMMMMMM   MMMMM   ~MMMMMM:  +MMM
M    MMMMMMMMMMMMMMMMM?   MMMMMZ                  MMMMMMMMMMMMMMM     7MMMZI    MMM:   =NMM7,   MMMMMMMMO   :8M?   MMMMM
MM?7MMMMMMMMMMMMMMMMMMMM8MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM7    :7MMMMMMMMMMZ7   77MMMMMMMMMMMMMM$   7MMMMMMMM
MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM
MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM
M                                                                                                                      M
M                           -  - --..--==  D o o r s   C S   5 . 8   B e t a   3  ==--..-- -  -                        M
M                                                                                                                      M
M                                                      By Kerm Martian                                                 M
M                                                    admin@cemetech.net                                                M
M                                                 http://www.cemetech.net                                              M
M                                                                                                                      M
MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM

Installation:
=============
Simply send DoorsCS.8xk to your TI-83+/SE or TI-84+/SE graphing calculator.  Run Doors CS via [Apps] --> DoorsCS6.
Full documentation at http://dcs.cemetech.net; discussions at http://www.cemetech.net/forum.

Quick Start Guide
=================
The following documentation was formatted from the Doors CS Documentation: http://dcs.cemetech.net/index.php?title=Quick_Start_Guide 

++ Pre-Installation ++

Before you can install Doors CS, you must first unzip the file you downloaded. If your computer is running Microsoft Windows XP, you
can simply double click this file and select the "Extract All" tab on the side of the screen. Once you have done this, proceed to the
"Transfer" Section.

If you are not running Microsoft Windows XP (or newer), you may need to use software such as WinZip or 7-zip to unzip the files.
Follow the instructions included with your program to extract the files, then proceed to the transfer step.

++ Transfer ++

Once you have unzipped Doors CS, you can begin the transfer. First, open your transfer program. On Windows machines, you will probably
do best with TIConnect software, available from Texas Instruments or on the CD that came with your calculator. For Linux based
computers, a number of utilities exist and can be found at Ticalc.org.
   1. Run TIConnect from your start menu.
   2. Select the "Device Explorer" button.
   3. Select the proper device from the list (Calculator should be plugged in)
   4. Open the folder you extracted Doors CS to.
   5. Inside this folder, select the appropriate version of DCS, based on your calculator model.
   6. Drag and Drop the file dcs6.8xk from the folder to the TIConnect Device Explorer.
   7. Follow the TIConnect prompts to send the file to your calculator. 

++ First Use ++

Sending the file to your calculator installs it; no further installation is necessary. To run Doors CS at any time, press the blue Apps
key on your calculator, and either use the arrows to select DoorsCS6 and press Enter or press the number corresponding to the DoorsCS6
entry in the menu. The first time that you run Doors CS, it will invisibly install an AppVar that contains default preferences. You can
edit these preferences via the submenus of the DCS Menu in the lower left of the Doors CS desktop

++ Keys ++

To navigate Doors CS, use the mouse cursor, controlled by the four arrow keys on your calculator. To normal or "left" click, press the
[Trace] or [2nd] keys. To secondary or "right" click, press the [Graph] or [Alpha] keys. You can turn your calculator off from Doors CS
by pressing the [ON] key; press it again to turn the device back on. [Clear] quits immediately back to the homescreen from the desktop.

++ Area of the Screen ++

In the main area of the desktop are up to six icons representing programs or files on your calculator, accompanied by filenames of up to
eight characters. You can left-click on any compatible file to run it. If Doors CS cannot run a file for some reason, whether due to
incompatibility or corruption, it will alert you to this fact. When you finish using a program, it should return you to the Doors CS desktop.
See the Compatibility page for the full list of filetypes Doors CS can understand. You can also right-click on files to edit their options or
create folders. Full details about the properties menu can be found on the Properties Menu page.

At the right side of the screen is the scrollbar. You can expedite scrolling by using the [-] and [+] keys to go one page up and one page
down respectively. You can also click on the bar itself to scroll down one page, or click the arrows at each end of the bar. The lower right
of the screen contains, from left to right, the free RAM meter, the battery power meter, and the close button. The close button is equivalent
to pressing [Clear].

The bottom left of the screen contains the icon seen in the top left of this page, the Doors CS Menu, usually abbreviated as the DCS Menu.
This provides access to options and advanced features of Doors CS. Some provide redundant access to features for those faimilar with desktop
computer interfaces. You can read more about the DCS Menu on the DCS Menu page.

++ Conclusion ++

You now have a working knowledge of utilizing Doors CS and its features. You are welcome to comment, ask questions, suggest features, or
just make your voice heard on the Cemetech Forum, or send an email to admin[at)cemetech(dot]net. Good luck with Doors CS! 


Credits
=======
Please see http://dcs.cemetech.net/index.php?title=Credits

More Information
================
Visit http://www.cemetech.net for more about Doors CS, and http://www.cemetech.net/forum for discussions, bug reports, and more.