Command Summary

Sends data or a variable to a connected CBL device.

Command Syntax


Menu Location

While editing a program, press:

  1. PRGM to access the program menu.
  2. RIGHT to access the I/O submenu.
  3. ALPHA B to select Send(.

Calculator Compatibility


Token Size

1 byte

The Send( command is used for sending data to a CBL (Calculator Based Laboratory) device (or another compatible device) via a link cable. With some exceptions, Send('s argument must be a variable: a real number, list, matrix, string, equation, picture, or GDB. An expression or a number will not work -- Send(5) or Send([A][B]) is invalid.

The exceptions are list or matrix elements (that is, you can do Send([A](1,1)) or Send(L1(2)) without an error) and non-variable lists typed out with { } brackets and commas.

1 Norland Robot

You can use send( with a get( for a Norland calculator robot. The format called CLR format. C stands for command number, L stands for left axle, and R stands for right axle. If the command number is 1, it makes the robot moves in a direction for the time specified later in the command. If it is 2, the robot moves until the bumper hits a wall. If it is 3, it moves for a specified amount of time and stops when the robot when the bumper hits a wall. For example, send({122,100}) will make the robot move forward for 100 centiseconds, send({222}) makes it go forward until the bumper hits the wall, and send({322,100}) makes the robot move forward for 100 centiseconds and stops it when the bumper is pressed. The last two axle control numbers are like this: 0=backwards 1=stop 2=forwards

2 Related Commands