anyone both built calc correct different drivers error everything freezes hardware hub ive mouse one pretty ps run seem sure syntax ti tici tried two using whats work wrong 0 2 mouse support tici

[Please note that this post has been rebuilt from a corrupted database.]
2 afraid complete debugging drivers keyboard program quite support working works

[Please note that this post has been rebuilt from a corrupted database.]
cool hub interest looks pretty someone taken

[Please note that this post has been rebuilt from a corrupted database.]
glad pix yeah

[Please note that this post has been rebuilt from a corrupted database.]
box build builiding canceled completed cos definatley develope electronics fantastic great hub ill itd ive neat posibilites progress project proper think tici tidy together try wanna wanted waste worked

[Please note that this post has been rebuilt from a corrupted database.]
cancel kermll projects sure

[Please note that this post has been rebuilt from a corrupted database.]
cancel dev right tici ult x

[Please note that this post has been rebuilt from a corrupted database.]
L0L. The rebuilt posts are funny.
Well..... Could you compile the mouse driver for the 83+ series? I don't have an 83..... Thanks.
Yeah, I'm going to be writing SEs for it for 6.0
WOO HOO! YAY! Very Happy
netham45 wrote:
WOO HOO! YAY! Very Happy
Laughing Glad to get such a positive reaction about that. Very Happy
Kerm, where are the actual schematics for the TICI mouse stuff?
There are schematics for the hub on ticalc.org, just plug the mouse into it.
http://www.ticalc.org/archives/files/fileinfo/256/25693.html
Oh yeah, when i go to get materials, shouldn't i get a 2.5mm male to 3.5mm female adapter?

(1) Case, 5/8" x 2 1/8" x 2 3/4"
(1) 3.5mm Stereo socket
(1) 2.5mm Stereo Socket
(1) Female mini-DIN socket
(1) 3xAAA battery case
(1) SPST Switch
+adapter
If you want, but you don't really need it if you have a calc-to-calc link cable.
(Where'd you find the PS/2 port?)
I bought one from Radioshack, and got another by scavenging from a PS/2 extension cable. I've tried desoldering them from motherboards, but that's quite tedious since they use high-heat solder.
KermMartian wrote:
I bought one from Radioshack, and got another by scavenging from a PS/2 extension cable. I've tried desoldering them from motherboards, but that's quite tedious since they use high-heat solder.

I don't believe you. I desoldered one from an old motherboard today and it worked fine, so my plans for an internal hub are coming along nicely. Now I just need to slice a huge hole in the back half of my case so it'll fit. (I already took some out of the front half and shaved down the PCB a little)
Nice. Well, I guess I wasn't using a good motherboard for it then. :/
Hey, since I have no other projects to work on right now, I'd be happy to work on mouse/keyboard drivers if you'd like. I'll need to learn the protocol, but that's what google is for. Smile
Actually, I already have drivers written and everything, I just need to fit them into the Doors CS framework.
  
Register to Join the Conversation
Have your own thoughts to add to this or any other topic? Want to ask a question, offer a suggestion, share your own programs and projects, upload a file to the file archives, get help with calculator and computer programming, or simply chat with like-minded coders and tech and calculator enthusiasts via the site-wide AJAX SAX widget? Registration for a free Cemetech account only takes a minute.

» Go to Registration page
Page 1 of 1
» All times are UTC - 5 Hours
 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

 

Advertisement