I want to make a port of my 5-instruction set computer system (based on the wdr paper computer).
This is a mockup of what I would like the user interface to look like:
I have a printout of the entire dcs7.2 sdk manual, so I was using that along side TokenIDE's gui designer.
Here's what I got:
Code:
(also I don't know how to pause the program so I can actually see the screen for more than .1 seconds).
I have several questions:
1. How do I make the font small like it is in Document DE?
2. How do I parse text line by line?
3. How do I update the register text boxes? I didn't see a "name" field for them in the manual.
I have other questions but these are the burning ones.
I do know how to program, I use python and c/c++ all the time at work and I know a bit of atmel and myriad shave assembly. I'm just completely lost when it comes to dcs basic.
***EDIT***
Here's an idea of what I want the software to do. I want it to emulate a 5 instruction set machine.
Here's a python program I made last night (stop button doesn't work, can't guarantee its stability) (needs pyqt5)
https://www.dropbox.com/s/o3r9fe9l972ugbl/main.zip?dl=0
Here's the theory on it:
https://pastebin.com/F6AYh1yx
This is a mockup of what I would like the user interface to look like:
I have a printout of the entire dcs7.2 sdk manual, so I was using that along side TokenIDE's gui designer.
Here's what I got:
Code:
sum(11,1
sum(9,0,255
sum(9,15,14,0,9,50,0,"TEXTMULTI
sum(9,12,75,1,255,0,255
sum(9,12,75,10,255,0,255
sum(9,12,75,19,255,0,255
sum(9,12,76,29,255,0,255
sum(9,12,76,38,255,0,255
sum(10,
(also I don't know how to pause the program so I can actually see the screen for more than .1 seconds).
I have several questions:
1. How do I make the font small like it is in Document DE?
2. How do I parse text line by line?
3. How do I update the register text boxes? I didn't see a "name" field for them in the manual.
I have other questions but these are the burning ones.
I do know how to program, I use python and c/c++ all the time at work and I know a bit of atmel and myriad shave assembly. I'm just completely lost when it comes to dcs basic.
***EDIT***
Here's an idea of what I want the software to do. I want it to emulate a 5 instruction set machine.
Here's a python program I made last night (stop button doesn't work, can't guarantee its stability) (needs pyqt5)
https://www.dropbox.com/s/o3r9fe9l972ugbl/main.zip?dl=0
Here's the theory on it:
https://pastebin.com/F6AYh1yx