OK, I'm trying to figure it out right now. I have some ideas...
<!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN">
<HTML><HEAD>
<TITLE>403 Forbidden</TITLE>
</HEAD><BODY>
<H1>Forbidden</H1>
You don't have permission to access /index.php
on this server.<P>
<P>Additionally, a 404 Not Found
error was encountered while trying to use an ErrorDocument to handle the request.
<HR>
<ADDRESS>Apache/1.3.33 Server at domitian.jatoleconomy.com Port 80</ADDRESS>
</BODY></HTML>
<HTML><HEAD>
<TITLE>403 Forbidden</TITLE>
</HEAD><BODY>
<H1>Forbidden</H1>
You don't have permission to access /index.php
on this server.<P>
<P>Additionally, a 404 Not Found
error was encountered while trying to use an ErrorDocument to handle the request.
<HR>
<ADDRESS>Apache/1.3.33 Server at domitian.jatoleconomy.com Port 80</ADDRESS>
</BODY></HTML>
Possible responses:
ADD
:: AUTHERROR1 : database access error
:: AUTHERROR2 : incorrect host password
:: AUTHERROR3 : database read error / no data submitted
:: CALCAUTHERROR1 : database access error
:: CALCAUTHERROR2 : incorrect calc password
:: CALCAUTHERROR3 : database read error
:: CALCAUTHERROR4 : database read error
:: CALCAUTHERROR5 : Calc not registered to this username / calc not registered
:: CALCAUTHERROR6 : database read error
:: CALCAUTHERROR7 : database read error
:: SUCCESS%%1 : Calc added to online database
REMOVE
:: CALCAUTHERROR8 : database read error
:: CALCAUTHERROR9 : database read error
:: CALCAUTHERRORA : Calc not registered to this username / calc not registered
:: CALCAUTHERRORB : database read error
:: SUCCESS%%1 : Calc removed from online database
FIND
::CALCAUTHERROR0 : database read error/calc requested not registered
::FAILED%%0%%0 : calc not online
::SUCCESS%%IP%%VIRTUAL_gCn_PORT
The virtual port is set by the host and sent in the initial ADD request, not returned by the server.
ADD
:: AUTHERROR1 : database access error
:: AUTHERROR2 : incorrect host password
:: AUTHERROR3 : database read error / no data submitted
:: CALCAUTHERROR1 : database access error
:: CALCAUTHERROR2 : incorrect calc password
:: CALCAUTHERROR3 : database read error
:: CALCAUTHERROR4 : database read error
:: CALCAUTHERROR5 : Calc not registered to this username / calc not registered
:: CALCAUTHERROR6 : database read error
:: CALCAUTHERROR7 : database read error
:: SUCCESS%%1 : Calc added to online database
REMOVE
:: CALCAUTHERROR8 : database read error
:: CALCAUTHERROR9 : database read error
:: CALCAUTHERRORA : Calc not registered to this username / calc not registered
:: CALCAUTHERRORB : database read error
:: SUCCESS%%1 : Calc removed from online database
FIND
::CALCAUTHERROR0 : database read error/calc requested not registered
::FAILED%%0%%0 : calc not online
::SUCCESS%%IP%%VIRTUAL_gCn_PORT
The virtual port is set by the host and sent in the initial ADD request, not returned by the server.
I changed it to take up less file size . I was looking for a copy of the gCn logo....i may have found the problem, got to test it, but while I was looking through the source, I noticed that one of the key-value pairs I was sending had been mistyped with md45 instead of md5
EDIT
===
never mind that wasnt it, but its good I found it nonetheless
EDIT
===
never mind that wasnt it, but its good I found it nonetheless
After seeing the whitepaper on the protocol, I would suggest modifying the protocol this way:
It would probably cut so
Pass a header:
1 byte - Sender ID
1 byte - Receiving ID
2 bytes - Size of Packet
Packet
This would cut down the data transferred from 3*sizeof(data_sent) bytes to sizeof(data_sent)+4 bytes. This would of course give a max size of 64kB of data at once, but no calc should need this much anyway (except major files on 68k).
It would probably cut so
Pass a header:
1 byte - Sender ID
1 byte - Receiving ID
2 bytes - Size of Packet
Packet
This would cut down the data transferred from 3*sizeof(data_sent) bytes to sizeof(data_sent)+4 bytes. This would of course give a max size of 64kB of data at once, but no calc should need this much anyway (except major files on 68k).
Visit my site at http://nerdyproductions.sobertillnoon.com
PokéGen on Sourceforge:
http://www.sourceforge.net/projects/pokegen
ticalc profile
PokéGen on Sourceforge:
http://www.sourceforge.net/projects/pokegen
ticalc profile
whaddya think Kerm? sounds good to me.
if you send me a copy of the server script I can see if it'll work on my website.
if you send me a copy of the server script I can see if it'll work on my website.
Hey brilliant one, way to put your pwd md5 in that screenie.
Edit:
>>Script wouldn't work on your server, because you don't have the Cemetech user database.
>>Better logos for you:
Edit:
>>Script wouldn't work on your server, because you don't have the Cemetech user database.
>>Better logos for you:
thanks for the logos.
I could use the script to test since my pwd is the same on the SFGP user database. (btw, notice that my pwdmd5 is wrapped in the picture. you cant see all of it )
I could use the script to test since my pwd is the same on the SFGP user database. (btw, notice that my pwdmd5 is wrapped in the picture. you cant see all of it )
Register to Join the Conversation
Have your own thoughts to add to this or any other topic? Want to ask a question, offer a suggestion, share your own programs and projects, upload a file to the file archives, get help with calculator and computer programming, or simply chat with like-minded coders and tech and calculator enthusiasts via the site-wide AJAX SAX widget? Registration for a free Cemetech account only takes a minute.
» Go to Registration page
» Go to Registration page
» Goto page Previous 1, 2, 3, ... 9, 10, 11 Next
» View previous topic :: View next topic
» View previous topic :: View next topic
Page 2 of 11
» All times are UTC - 5 Hours
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
Advertisement