Archives: TI-84 Plus C Silver Edition BASIC Science Programs
Currently viewing:
  1. Archives
  2. All files
  3. TI-84 Plus C Silver Edition
  4. TI-84 Plus C Silver Edition BASIC Programs
  5. TI-84 Plus C Silver Edition BASIC Science Programs



  1. This little program solves for the mass in grams, number of moles, or the number of molecules between two chemicals. For TI-84+CSE only. Uses Pic4. Includes DCSE 8 icon.
    This update fixes calculations involving Avogadro's number.

    Categorized under:
  2. This is an electron configuration program for the TI-84+C that calculates the configurations for all 118 elements
    Includes noble gas notations. Versions: 0.1 - First release; 0.2 - Correctly gives the configurations for all the elements, the symbol, and a neater display; 0.21 - Performance upgrades; 0.22 - Doors 8.0 icon, more performance upgrades, and an even cleaner display; 0.3 - Search feature, more menus, and basic info on each element; 0.31 - Periodic table display, elements' types, and a few minor bug fixes; 0.32 - More info added, ability to move between elements with arrows, and minor adjustments

    Categorized under:
  3. This program features a family and state periodic table, element list and displays an element(symbol, name, atomic number, atomic mass, state, density, melting and boiling point). Requires Doors CSE 8.1.

    Categorized under:
  4. This allows you to do mole-to-mass, mass-to-mass, and mole-to-mole conversion. Will also do all needed calculations for stoichiometry. Read the included readme for further information.

    Categorized under:
  5. Molecular Weight Calculator allows you type a chemical formula as one string and it will output its molecular mass. For example, you could input C6H12O6 and it will output 180.18g/mol. This is my first upload so constructive criticism and suggestions are greatly appreciated. Thanks to KermMartian and gaventemples31415 for suggestions about optimization.

    Categorized under:
  6. Calculates in ohms and the accuracy of the resistor. It can convert colors to value and value to colors. Supports three to six band resistors. Features a graphical representation of a resistor.

    Categorized under:
  7. An program i made in Chemistry. Can calculate a lot of things, like energy, calories, and heat in/out. can also convert between joules and calories and display answers in either joules or calories(if applicable)

    Categorized under:
  8. This programs calculates mass in grams of atomic structures.

    Categorized under:
  9. Program that solves Kinematics equations. Detailed explanation included in the readme.

    Categorized under:
  10. Light calculating program i made in Chemistry last year. You input values and it calculates frequency, wavelength and energy of a photon.

    Categorized under:
  11. Have you ever wanted a program give you the difference between a magnitude 1 earthquake and magnitude 10? Have science homework that requires difference from magnitude 1 to Infinite? Well this is the program for YOU! For know you need to put lowest number first and highest number second.

    Categorized under:
  12. The Program AIRUS uses US units as the inputs and outputs. Input: T = Temperature in Fahrenheit (°F), B = Air Pressure in inHg (inches of Mercury), H = Relative Humidity (%). Output: S = Saturated Water Vapor (psi), A = Approximate Actual Density Altitude (DSI) (feet), X = Dew Point (°F).

    Categorized under:
  13. CBLLight is a powerful and versatile program for using the TI Light Sensor with the CBL, CBL 2, and the Vernier LabPro.

    This is a functioning beta version. Please see the readme for more information.

    Categorized under:
  14. Program that calculates the refraction of light, simply use the F1-F4 keys to enter whatever information you have and once the program has enough to calculate the rest, it will. If there is a crit angle, it will calculate it, and if there isn't then it will display none. It also draws the situation using xlibc half-res mode, so you will want to make sure you have Doors CSE installed. In the event of a total internal reflexion, the beam will bounce
    off the surface as it would in real life.

    Categorized under:
  15. This program was made for CC18

    This is a 84+CSE Hybrid basic program that tells you the freezing(melting) points of all of the ‘normal’ metals [‘normal’ meaning no lanthanides or actinides or the triple digit elements]

    Use the left and right arrow keys to scroll through elements, and press [clear] to exit the program

    Requires DoorsCSE libs to run <for people who saw this as my contest entry, i fixed the bismuth bug>

    Categorized under:
  16. Converts either a DNA or RNA sequence to the other while also outputting the corresponding amino acid sequence. Supports sequences of up to 66 bases. Use [f5] to toggle between editing DNA and RNA. Open the README for more information. Feel free to PM me for any questions or bug reports.

    Categorized under:
  17. A very simple program that does exactly what it sounds like it does. This program has you select the colors of
    the bands on a resistor and then it tells you what the resistance, tolerance, and temperature (for 6 band resistors)
    is of a resistor with those color bands. This program works for 4, 5, and 6 band resistors. This program will also,
    automatically convert the resistance number into Ohms, Kilo Ohms, or Mega Ohms. A very simple and easy program
    to use.

    Categorized under:
  18. A very simple program that does exactly what it sounds like it does. This program simply has you enter in the three
    numbers and the letter(s) (i.e. 103K or 3R3K) that are shown on a disc capacitor and the program will find the value of that capacitor.
    A very simple, easy, and useful program to have.

    Categorized under:
  19. The Ultimate Temperature Converter! This is a very simple, easy program to use. This program
    that has you select which temperature unit you wish to convert from and then the program will
    give you that temperature in seven other different units.

    Categorized under:
  20. The Julian Date Converter is a very simple program that will accurately converter between the standard date
    (Month, Day, Year) and the Julian Date. This program will also allow you to convert from the Julian Date to the
    standard date.

    Categorized under:
  21. This program, written entirely in BASIC, has a functional timer and a stopwatch accurate
    up to 1/100 of a second! (Depending on the calculator, of course.) It uses a calibration
    technique that makes the stopwatch accurate for whatever calculator you use it on.

    Categorized under:

File statistics are updated periodically, so numbers shown in this listing may not agree exactly with those shown on individual files.