Introduce Yourself!

The_Coded · Advanced Member Joined: 30 Jul 2012 Posts: 210

Hmm, I have the 92, I'd it capable of z80 assembly and basic since its a Motorola 68k processor?
_________________

AHelper · Posted: 31 Jul 2012 10:07:11 am Post subject:

The Motorola 68000 CPU and the Zilog Z80 were made by two (rival/different) companies. They each have their own assembly languages. The 68k series of calcs include the ti89(TI), ti92x and the Voyage 200, whereas the Z80 calcs include the TI73,81,82,83x,84x,85, and 86. I don't know of any Z80 emulators that run on the 68k calcs.
_________________
°ᴥ° Get Lucky

<BrandonW> "You don't even want to know what TI Connect does when it's just detecting your calculator...It ACTUALLY ERASES THE SWAP SECTOR on every communication attempt...EVERY SINGLE ATTEMPT...Yes, TI Connect will kill your calculator..What do I have to do to get your attention?!....Such a bloated protocol."

The_Coded · Advanced Member Joined: 30 Jul 2012 Posts: 210

Crap -_- but 68k basic runs on em...hmm, decisions decisions...
_________________

AHelper · Posted: 31 Jul 2012 10:13:01 am Post subject:

Also note that the BASIC versions on the 68k calcs and the Z80 calcs are not the same.
_________________
°ᴥ° Get Lucky

<BrandonW> "You don't even want to know what TI Connect does when it's just detecting your calculator...It ACTUALLY ERASES THE SWAP SECTOR on every communication attempt...EVERY SINGLE ATTEMPT...Yes, TI Connect will kill your calculator..What do I have to do to get your attention?!....Such a bloated protocol."

The_Coded · Advanced Member Joined: 30 Jul 2012 Posts: 210

arrrrrgh....-_- so stressful, i've used an 89 before, and the prizm's new horizon seems promising..never used 83-84+ though
_________________

AHelper · Posted: 31 Jul 2012 10:29:04 am Post subject:

If you want to try a ti83+, you can use jsTIfied.
_________________
°ᴥ° Get Lucky

<BrandonW> "You don't even want to know what TI Connect does when it's just detecting your calculator...It ACTUALLY ERASES THE SWAP SECTOR on every communication attempt...EVERY SINGLE ATTEMPT...Yes, TI Connect will kill your calculator..What do I have to do to get your attention?!....Such a bloated protocol."

The_Coded · Advanced Member Joined: 30 Jul 2012 Posts: 210

O_o all stores here have is 84+, 89, Nspire, Casio Prizm C10-20
_________________

Sobenhauson · Newbie Joined: 31 Jul 2012 Posts: 1

I use a couple of Basic programs I wrote for a math class I teach at KU. I came here after searching for an online editor.

KermMartian · Posted: 31 Jul 2012 01:53:06 pm Post subject:

matrefeytontias · Posted: 04 Aug 2012 04:49:40 pm Post subject:

Hi all !

I'm Matrefeytontias, 14, French, and came here because the site is the home of several great programs/tools (sourcecoder was useful to me Smile

), so I thank that I could join the site (why not).

I program on z80 calcs (hex, ASM and Axe) and on a computer too (C, C++, HTML, CSS, JS, VB.NET, Python, Ruby). I'm also the creator of Jetpack 8x(+), which you can found on Ti-Calc Smile

I planned several projects for z80, so you'll see me on the forums more than once !
_________________
/-\ >< |= \_/ 5 |= |?

merthsoft · File Archiver Joined: 09 May 2010 Posts: 2735

Hello, nice to have you here! Make sure to upload your programs to the Archives and post any projects in the Your Projects forum.
_________________
Shaun

KermMartian · Posted: 05 Aug 2012 07:57:31 am Post subject:

matrefeytontias · Posted: 05 Aug 2012 09:51:09 am Post subject:

Hem, my best program in C is Metal Slug 8, a 2D arcade game I recommend for everyone (it's a NeoGeo game), but unfortunately I lose the source because of a virus and the finished program has been lost with Megaupload Sad

In C++, surely ASMedit, a tiny Z80 ASM IDE made with Qt, including hex, 83 and 83+ compilation and syntax highlighting Smile

you can find the last version here : http://mattias.refeyton.fr/espace-ti/ASMeditv2.5_setup.exe (it's a bit bugged in fact ^^').

In HTML/CSS/JavaScript, I haven't done anything consequent yet, but since I have a domain, I think of doing my own site.

Same for Python, I'm familiar with it but haven't done anything consequent.

With VB.NET, the biggest program I did is a tool for Axe keycodes, with switch between FR and EN (you can find it on Espace-Ti forum).

With Ruby, I mainly programmed RPG Maker with RGSS2 ^^

With z80 hex, I did several tools which you can found on Espace-Ti forum too.

With Axe, and without any doubt my best program is still Jetpack Smile

but I also did several programs like an on-calc unsquisher (which you can find on Omnimaga) and I'm currently working on isometry.
_________________
/-\ >< |= \_/ 5 |= |?

ti83head · Posted: 06 Aug 2012 08:53:06 am Post subject: Hello All

I'm new to Cemetech and have discovered your site through ticalc.org and also through the Youtube post of Doors.
I am an electrician / designer and hobbyist programmer. I first learnt programming on a Commodore Pet, Vic20 and ZX81. I have programmed CNC machine tools and dabbled with PIC microcontrollers.
After a brief flirtation with HP calculators I have recently picked up a TI-83 Plus and a vintage TI-85 and am considering a TI-86 just for collectability.
The work that has been done by this communitiy is outstanding. It reminds me of the early days of home microcomputing when programmers would squeeze every last drop of power from limited hardware by means of ingenious coding.
Kerms work on Doors is breathtaking and on reading his CV I feel in awe of his talents. I have purchased his excellent book and am currently working through it to get upto speed with TI-Basic before finally getting my head around Z80 assembler - a long standing unfulfilled ambition of mine.
Thats all for now...I will keep you informed of my progress..! Rolling Eyes

JamesV · Member Joined: 19 Jun 2012 Posts: 137 Location: Australia

Welcome ti83head! Great to have you join the community Smile

_________________
www.jvti.org

KermMartian · Posted: 06 Aug 2012 09:40:50 am Post subject: Re: Hello All